Stage 8 - Configure FMCB to Open PS2 Loader
In this stage we will
- Check PS2 Loader runs from the Sony Memory Card
- Configure FMCB to add Open PS2 Loader to the main loading screen
In the previous stage we managed to get a boot loader onto the Memory Card so we can run a file manager now
on the PS2 Phat without the need for a DVD boot disk
Select Free MCBoot Configurator
What we want to do here is configure FMCB to add a new menu item to link to Open PS2 Loader. This will
allow FMCB to display it here and link to the files you copied earlier on the Memory Card
Select OSDSYS
Move down to Configure Item 1
Adjust this item until you get to a free slot (in this case Item 6 is not
configured)
Give it a name. This is the name that will appear in the FMCB Menu
Next move to Path as we need to set the path to the Open PS2 files
Go to the Memory Card (mc0 in this case) and select the directory where Open PS2
is located
Save the Configuration to the Sony Memory Card
Make sure the USB is removed
Reboot the PS2 and you should see the new menu item
This completes stage 8